Process-Informatik EtherSens Control
数字和模拟输入/输出的监视和协议
设备中的逻辑评估(小型控制任务)
通过TCP / IP将数据传输到S7-PLC中的DB
技术参数-Process-Informatik EtherSens Control
电源电压 | 24V +/- 20% |
功耗 | 3瓦(没有任何开关输出) |
显示 | Web浏览器 1个状态LED双色 |
处理/配置 | Web浏览器 |
接口 | 12个数字IO可切换为 - 输入(最大24VDC 8k2(外部上拉)/最小1.6mA)或 - 输出(24VDC 400mA) 4 x模拟输入V1.0(0-5V) - 选择。与ext.Shunt 0 / 4-20mA - 选择。与分机。安定0-10 / 24 / 50V 4 x模拟输入V1.1(可在U,I,差分之间切换) - 全15位分辨率的自由配置电压输入: 0-50V,0-40V,0-20V,0-10V,0-5V,0-4V,0-2V, 0-1V,0-0.5V,0-0.25V - 完整的15位可自由配置的差分电压输入 分辨率AI1 < - > AI2和AI3 < - > AI4: +/- 50V,+/- 40V,+/- 10V,+/- 5V,+/- 4V,+/- 2V,+/- 1V,+/- 0.5V,+/- 0.25V - 全15位分辨率的可自由配置的电流输入: 0-20mA,4-20mA - 可以选择AD转换器的采样率: - 快速=几乎转换/短精度 平衡=中间转换/中间精度 - 精确=慢转换/高精度 - 改变后的测量范围被校准为: - 0V / 0mA的偏移量 - 电压/电流的斜率 (理想的测量范围/全量程结束) - 相对值可以配置为原始电压 - / 电流值。例如: 在电压输入10V分别测量5V, 相对最小值= 0公斤,相对最大值= 100公斤, 所以显示的值是50公斤 最小和最大配置为0测量 将显示电压/电流值。 4 x模拟输出0 / 4-20mA(电源24V) 插槽为microSD 天线连接器GSM / FME(m)(2.4 GHz IEEE 802.11b / g) 10 / 100BaseTX RJ45以太网插头 出厂设置按钮 |
工作温度 | 5 - 55°C |
外壳 | ABS塑料外壳V0 |
尺寸 | 100 x 112 x 45mm |
供货范围 | EtherSens Control WIFI-stub-antenna |
Commercial data: | |
EAN number | 4260363244336 |
重量 | 0.2000kg |
订货信息-Process-Informatik EtherSens Control
Art. ID. | name |
9200-A-24V | EtherSens Control 24V Analog-IO V1.0 Supply voltage: 24V DC 4 x analog IN 0-5V opt. with ext.Shunt 0/4-20mA opt. with ext. restistance 0-10/24/50V 4 x analog OUT 0/4-20mA (24V) LAN and WIFI-interface integrated function to the same time |
9200-A-24V-V1.1 | EtherSens Control 24V Analog-IO V1.1 Supply voltage: 24V DC 4 x Analogue Input (switchable between U, I, differential) 4 x analog OUT 0/4-20mA (24V) LAN and WIFI-interface integrated function to the same time |
9200-AA-24V | EtherSens Control 24V 2x Analog-IO V1.0 Supply voltage: 24V DC 8 x analog IN 0-5V opt. with ext.Shunt 0/4-20mA opt. with ext. restistance 0-10/24/50V 8 x analog OUT 0/4-20mA (24V) LAN and WIFI-interface integrated function to the same time |
9200-AA-24V-V1.1 | EtherSens Control 24V 2x Analog-IO V1.1 Supply voltage: 24V DC 8 x Analogue Input (switchable between U, I, differential) 8 x analog OUT 0/4-20mA (24V) LAN and WIFI-interface integrated function to the same time |
9200-AD-24V | EtherSens Control 24V Analog-/Digital-IO V1.0 Supply voltage: 24V DC 12 x digital IN or OUT 24VDC 400mA free config with software 4 x analog IN 0-5V opt. with ext.Shunt 0/4-20mA opt. with ext. restistance 0-10/24/50V 4 x analog OUT 0/4-20mA (24V) LAN and WIFI-interface integrated function to the same time |
9200-AD-24V-OW | EtherSens Control 24V Analog-/Digital-IO V1.0 o. LAN Supply voltage: 24V DC 12 x digital IN or OUT 24VDC 400mA free config with software 4 x analog IN 0-5V opt. with ext.Shunt 0/4-20mA opt. with ext. restistance 0-10/24/50V 4 x analog OUT 0/4-20mA (24V) Only LAN-interface |
9200-AD-24V-V1.1 | EtherSens Control 24V Analog-/Digital-IO V1.1 Supply voltage: 24V DC 12 x digital IN or OUT 24VDC 400mA free config with software 4 x Analogue Input (switchable between U, I, differential) 4 x analog OUT 0/4-20mA (24V) LAN and WIFI-interface integrated function to the same time |
9200-AR-24V | EtherSens Control 24V Analog-/Relay-IO Supply voltage: 24V DC 4 x analog IN 0-5V opt. with ext.Shunt 0/4-20mA opt. with ext. restistance 0-10/24/50V 4 x analog OUT 0/4-20mA (24V) 4 x Relay-OUT 230VAC/16A LAN and WIFI-interface integrated function to the same time |
9200-AR-24V-V1.1 | EtherSens Control 24V Analog-/Relay-IO V1.1 Supply voltage: 24V DC 4 x Analogue Input (switchable between U, I, differential) 4 x analog OUT 0/4-20mA (24V) 4 x Relay-OUT 230VAC/16A LAN and WIFI-interface integrated function to the same time |
9200-D-24V | EtherSens Control 24V Digital-IO Supply voltage: 24V DC 12 x digital IN or OUT 24VDC 400mA free config with software LAN and WIFI-interface integrated function to the same time |
9200-DD-24V | EtherSens Control 24V 2x Digital-IO Supply voltage: 24V DC 24 x digital IN or OUT 24VDC 400mA free config with software LAN and WIFI-interface integrated function to the same time |
9200-DR-24V | EtherSens Control 24V Digital-/Relay-IO Supply voltage: 24V DC 12 x digital IN or OUT 24VDC 400mA free config with software 4 x Relay-OUT 230VAC/16A LAN and WIFI-interface integrated function to the same time |
9200-R-230V | EtherSens Control 230V Relay-IO Supply voltage: 230V AC 4 x Relay-OUT 230VAC/16A LAN and WIFI-interface integrated function to the same time |
9200-R-24V | EtherSens Control 24V Relay-IO Supply voltage: 24V DC 4 x Relay-OUT 230VAC/16A LAN and WIFI-interface integrated function to the same time |
扩展型号:
Art. ID. | name |
9230-AIO | Extension Analog-IO V1.0 Extension-board for EtherSens-devices 4 x analog IN 0-5V opt. with ext.Shunt 0/4-20mA opt. with ext. restistance 0-10/24/50V 4 x analog OUT 0/4-20mA (24V) |
9230-AIO-V1.1 | Extension Analog-IO V1.1 Extension-board for EtherSens-devices 4 x Analogue Input (switchable between U, I, differential) 4 x analog OUT 0/4-20mA (24V) |
9230-DIO | Extension Digital-IO Extension-board for EtherSens-devices 12 x digital IN or OUT 24VDC 400mA free config with software |
9230-EI2C-3.3V | Extension with ext. galv. separated I2C 3.3V Extension-board for EtherSens-devices with galvanic separated external I2C-connector for 3.3V |
9230-EI2C-5V | Extension with ext. galv. separated I2C 5V Extension-board for EtherSens-devices with galvanic separated external I2C-connector for 5V |
9230-ENERGY | Extension Energy-IO Extension-board for EtherSens-devices Energy-analysis (EN 50470-1 EN 50470-3) L1, L2, L3, N realtime analysis Up to 8000 measurements / second Hz / cos phi / power-factor Energy consumption kWh For Rogwski-coils up to 0,5V |
9230-GG | Bigger Case Width 90mm instead of 45mm |
9230-LTE | Extension LTE-modem LTE-modem-board for EtherSens-devices Send/receive of SMS-messages Communication from/into internet |
9230-MIO-232 | Extension RS232-IO Extensionboard for EtherSens-devices V1.0 for RS232 (RxD, TxD) |
9230-MIO-422 | Extension RS422-IO Extensionboard for EtherSens-devices V1.0 for RS422 (4-wire) |
9230-MIO-485 | Extension RS485-IO Extensionboard for EtherSens-devices V1.0 for RS485 |
9230-MIO-TTY | Extension TTY-IO Extensionboard for EtherSens-devices V1.0 for TTY (incl. 2x current-sources) |
9230-NT-230V | Power-supply-rack-unit 230V Input voltage: 100 - 240VAC 50-60Hz Output voltage: 24V DC Power: 4W |
9230-RIO-230V | Extension 230V Relay-IO Extension-board for EtherSens-devices Supply voltage: 230V AC 4 x relay-OUT 230VAC/16A |
9230-RIO-24V | Extension 24V Relay-IO Extension-board for EtherSens-devices Supply voltage: 24V DC 4 x relay-OUT 230VAC/16A |
配件
Art. ID. | name |
9230-ANT-WAND | Stationary Wifi-antenna for wall fastening for EtherSens-devices, cable length: 5m incl. bracket |
9230-LTE-ANTW | Stationary LTE-antenna for fixed mounting for EtherSens-devices LTE-modem cable length: 2m |
9230-SD-32 | Micro-SD-card 32GB for EtherSens-devices SDHC class 10 |
9240-SDÜ | Option Safe S7-PLC-data-transmission Function extension for recognition of save data-transmission by toggle bit or counters in the S7-PLC. In case of a failure, a default configuration is mapped to the outputs. |
9250-1 | Widerstandsanpassung EtS |
9352-WLAN-ANT | Magnetic base antenna for S7-WLAN-Bridge, WLAN-Klemme, EtherSens cable length: 3m |
9391.1 | 24V DC power-supply unit 625mA Primary 110V - 240 VAC Euro+USA-plug |
9636-CROSS | Cross-cable 3m Cat5+, shielded RJ45 plug <=> RJ45 plug, twisted pinning |
9636-TCPIP | Patch-cable 3m, Cat5+, shielded RJ45 plug <=> RJ45 plug, 1:1 |
9636-TCPIP.02M | Patch-cable 0.25m, Cat5e, shielded RJ45 plug <=> RJ45 plug, 1:1 |
9636-TCPIP.1M | Patch-cable 1m, Cat5e, shielded RJ45 plug <=> RJ45 plug, 1:1 |
传感器
Art. ID. | name |
9220-SONNE | Sun-light-sensor for EtherSens max. 220k Lux (switchable ranges) 5V DC supply (from I2C-interfaceport) I2C-connection 1m |
9220-U-I-BOX | U-I-box for EtherSens max. 1000V DC / 40A 24V DC supply 20cm power-cable 4mm2 with Amphenol-plug I2C-connection 1m |